Advantage Hyvolt ii Electrical Insulating Oil
OVERVIEW
ADVANTAGE HYVOLT II is an electrical insulating naphthenic oil that meets the ASTM D-3487 specification for inhibited oils. Its very low pour point, excellent electrical properties and high level of oxidation stability makes ADVANTAGE HYVOLT II ideal for the demanding requirements of today’s leading transformer manufacturers.
APPLICATIONS
ADVANTAGE HYVOLT II is designed for use in any electrical application requiring an ASTM D-3487 Type II insulated oil.
FEATURES AND BENEFITS
ADVANTAGE HYVOLT II has very high dielectric strength that exceeds most international requirements and excellent oxidation stability to reduce sludge and acid formation. Its inherent low pour point gives ADVANTAGE HYVOLT II excellent cooling properties and it can be readily mixed with similar ASTM D-3487 oils.
SPECIFICATIONS
ASTM D-3487
TYPICAL PROPERTIES
TEST DESCRIPTION | TEST METHOD | SPECIFICATIONS | MARKETING VALUES | ||
---|---|---|---|---|---|
PRODUCT CODE 101 | MIN | MAX | |||
Viscosity, sus at 378°C | ASTM D 445 | 66.0 | 59.2 | ||
Viscosity, SUS at 98.9°C | ASTM D 445 | 36.0 | 34.0 | ||
Viscosity, cSt atLo°C | ASTM D 445 | 76.0 | 64.2 | ||
Viscosity, cSt at 40°C | ASTM D 341 | 12.0 | 9.3 | ||
Viscosity, cSt at 100°C | ASTM D 341 | 3.0 | 2.3 | ||
Specific Gravity, 156°C | ASTM D 4052 | 0.9100 | 0.8862 | ||
Flash Point, COC, °C | ASTM D 92 | 145 | 155 | ||
Color, ASTM | ASTM D 6045 | 0.5 | LO.5 | ||
Pour Point, °C | ASTM D 5949 | -40 | -64 | ||
Aniline Point, °C | ASTM D 611 | 63.0 | 84.0 | 74.7 | |
lnterfacial Tension, 25°C, dynes, cm | ASTM D 971 | 40 | 51 | ||
Visual Examination | ASTM D 1524 | Clear & Bright | Clear & Bright | ||
Electrical Properties | |||||
Dielectric BreakLdownL at 60 Hz, Disk electrodes, kV | ASTM D 877 | 30 | 40 | ||
Electrical Properties | ASTM D 1816 | 47 | |||
Power Factor at 60 Hz, 25°C, % | ASTM D 924 | 35 | 0.05 | 0.005 | |
Power Factor at 60 Hz, 100°C, % | ASTM D 924 | 0.30 | 0.075 | ||
Gassing Tendency, pILlmin | ASTM D 2300 | 30 | 12 | ||
Chemical Properties | |||||
Oxidation Stability | ASTM D 2440 | ||||
72 hr: Sludge, % by mass | 0.1 | <0.01 | |||
Total Acid Number, mg KOHlg | 0.3 | <0.01 | |||
164 hr: Sludge, % by mass | 0.2 | <0.01 | |||
Total Acid Number, mg KOHlg | 0.4 | <0.01 | |||
Oxidation Stability (Rotating Bomb Test), minutes | ASTM D 2112 | 195 | 248 | ||
Oxidation Inhibitor Content, wt°/o | ASTM D 2668 | 0.15 | 0.30 | 0.26 | |
Corrosive Sulfur | ASTM D 1275 (B) | Noncorrosive | Noncorrosive | ||
Water Content, ppm | ASTM D 1533 | 35 | 9 | ||
Neutralization Number, mg KOHlg | ASTM D 974 | 0.03 | <0.01 | ||
PCB Content, ppm | ASTM D 4059 | Not detected | Not detected | ||
Health and Safety Properties (not an ASTM D 3487 requirement) | |||||
Polycyclic Aromatic Compounds, Iwt% | IP 346 | 3 | <3 | ||
Modified Ames Assay | ASTM E 1687 | PASS | PASS | ||
FDA Regulation | 21 CFRL178.362Lo (C ) | PASS | PASS |